PS3 Power Supply

How to Repair PS3 Power Supply Fuses

PS3 Power Supply - Protection of the gaming console PlayStation 3 is weak and prone to shoot at the slightest provocation electricity. If the fuse is blown, the PS3 has stopped working and replace the fuse. Under the PS3 in time and money costs of the garage, so it's best to replace the fuse can be done with minimal effort and allows you to go back to reading.
  1. Unplug the power cord to the PS3 and PS3 on a clean work surface. Remove the screws in the two rubber feet on the left side of the PS3 with a screwdriver. Slide the housing and set aside.
  2. Remove the seven screws from the body, which is now exposed. Unhook the two clips on the back of the case. Take a corner of the box and remove it. Putting aside the case.
  3. Remove the screws at the top of the food. Set the screws aside. Disconnect the plug going to the power of the board by pulling straight. Lift and remove the power of PS3. Unplug the power cord to the back of the power by pulling straight. Plug the power supply side.
  4. Unplug the AC adapter and remove the fuse pulled. Clean the area where the fuse blowing with the brush of camel's hair was. Remove the spare fuse and put it in your room and see who is sitting in position. Connect the power cord to the mains. Insert the back power to the position on PS3. The plug from the back of the card into the socket. Screw the power supply to the PS3.
  5. Put the case to the PS3 in order to cover the supply and circuits. Place the two clips on the back, and again in the seven screws. Slide the outside back for the PS3 and the screws on the left under the two rubber feet. Connect the power cord and turn on the PS3.
Please read other articlesPS3 YLOD FIX


Post a Comment